// Adding few more8IGHT-T Nitro RTR 1/8 4WD Truggy from Losi - RC Driver
Sunday, October 21, 2018
Home » News » 8IGHT-T Nitro RTR 1/8 4WD Truggy from Losi

8IGHT-T Nitro RTR 1/8 4WD Truggy from Losi


If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Your fast track to nitro truggy racing
4mm T-6 aluminum chassis plate
Spektrum™ ultra-torque waterproof metal-gear steering servo
Gen III radio tray for longer servo life
Dynamite® .28 nitro engine with pull start
Metal-gear transmission and sealed differentials
Pre-set suspension geometry
Center and rear dogbones
15mm adjustable oil-filled shocks
Spektrum™ waterproof metal-gear servo
Includes Spektrum DX2E DSMR® transmitter
Includes Dynamite 1600mAh 6V NiMH receiver pack
Product Specifications
Type:Nitro Truggy


Length:18.75 in (476mm)

Width:16.38 in (416.1mm)

Height:7.30 in (185.5mm)

Wheelbase:14.93-15.09 in (379-383mm)

Chassis:4mm Plate, Aluminum

Suspension:4-wheel Independent


Tire Type:Losi XTT

Motor or Engine:Dynamite .28 Nitro Engine



Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump

Gear Pitch:1.0Mod


Shock Type:15mm bore, Composite


Ball Bearings:Full Precision Ball Bearings

Fuel Tank Capacity:150cc

Experience Level:Beginner

Recommended Environment:Outdoor

Click here for more info – 

Leave a Reply

Your email address will not be published. Required fields are marked *