Remove pins that secure the front bumper.
Remove the stock bumper mount.
The chassis brace is not needed so it comes off.
The shocks can then be mounted to the new towers.
Remove the rear bumper and its mount. A screw holds the battery tray. It also has to be removed.
Remove the rear shock towers.
The battery tray is attached to the center H brace. Remove the four screws that secure the brace and slide the unitout the end of the chassis rails. Another screw is removed to release the front of the tray.
Remove the Plastic H brace and replace it with the new STRC brace using Screws that are included with the STRC part.
The STRC bumper is secured in between the chassis rails with STRC screws.
Install the bumper into the new mount using the same screws.
Remove the front shocks from their mounts.
The shock towers are held in place by two screws each.
Mount the STRC shock towers using the stock screws.
Slide the battery tray unit in between the chassis rails and secure the H brace with the new screws.
The new rear bumper mount can be placed using new screws. The battery tray is secured to the new mount.
Mount the STRC rear shock towers just just as you did the fronts. Reinstall the shocks and hit the trails.
• STRC Precision CNC-Machined Aluminum Parts
• STA80025FGM Front Shock Towers
• STA80025RGM Rear Shock Towers
• STA80026HGM HD Center “H” Brace
• STA80125FGM Front Bumper Mount
• STA80125RGM Rear Bumper Mount