Home » The Buzz (page 3)

The Buzz

New XRAY Graphite XT2 “High-Traction” A-Arms

XRAY has just released their new XT2 Stadium Truck lower suspension arms made from specially-formulated graphite composite material. The exclusive composite mixture used for suspension arms is a perfect balance between reliability and performance. The suspension arms are rigid to …

Read More »

HUDY’s new 1/8 On-Road Transport Bag

HUDY currently offers an extensive line of R/C carrying bags, and they continue to expand their lineup by releasing their new 1/8 scale onroad bag. As expected, the new bag features signature HUDY graphics, high-quality European materials, padded walls, and …

Read More »

RDRP machines new RC8B3 Aluminum Rear Chassis Brace Mount

RDRP is pleased to release their newest option part, this time catered for the Team Associated RC8B3. This is their all-new Aluminum Rear Chassis Brace Mount. A direct replacement for the standard composite plastic part, the connector between the rear chassis …

Read More »

Dustin Evans now representing Reedy & driving Team Associated

Dustin Evans, a longtime TLR driver, has been very quiet this off-season, and was assumed to be continuing with his long-time sponsors TLR/Orion, HOWEVER, 2017 proves to be quite a change for the Reedy Race and ROAR National Champion! Dustin …

Read More »

XRAY welcomes Ty Tessmann for 2017

After an “off-season” from racing that was full of rumors, perhaps one of the most talked about was that of Ty Tessmann. Tessmann announced his departure from HB Racing less than a month ago, and now puts the rumors to …

Read More »

XRAY’s releases new 90T / 64-pitch Spur Gear

XRAY has just released their new 90T addition to the range of precision-molded 64-pitch offset spur gears is made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. This new spur gear allows …

Read More »

A New Champion: Team Associated’s History in 4wd Buggy Racing

The new Team Associated B64 will be following in the footsteps of some incredible buggies, each with their own story, and their own piece of history. Join Team Associated as they take a walk down memory lane, from the handmade 4WD …

Read More »

AVID machines new “Domed” Titanium Droop Screws

Avid has just released their new M4x8 Titanium Droop Screws, designed specifically for 1/10 scale touring cars. The new droop screws are billet machined from 6Al-4V Titanium, and feature a dome design to help prevent digging and grabbing of the chassis. …

Read More »

PR Racing unveils new SB401 LW 1/10 4wd buggy

Weight has always been a focus in the world of R/C car racing, and PR Racing has just released their newest version of their PR SB401 1/10 4wd buggy with that focus in mind. The 2017 version is titled the “SB401 …

Read More »

HRC Racing “Pathfinder” 14mm Monster Truck Tires

HRC Racing has introduced their all-new Pathfinder 1/10 Monster Truck Tires, especially designed for 1/10 Monster Trucks with 14mm hex adaptors, like the Team Magic E5. These tires provides very high grip on many different surfaces. The HRC61152B – HRC Pathfinder …

Read More »

JConcepts introduces B6/B6D Billet Servo Mount

  Setting the trim on any R/C car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. JConcepts introduces the servo mount bracket for the B6/B6D vehicles. Constructed of billet aluminum and …

Read More »

Rock Rey Scale Rock Racer from Losi

Losi - Rock Rey Scale Rock Racer

The 1/10th 2.2 Rock Rey Rock Racer is incredibly versatile. Not only can it take on rocks with ease, this monster can bash over pretty much anything, anywhere. Through mud and water—at staggering speeds over 40 MPH. It features AVC …

Read More »

New Slash 4X4 Ultimate – Now with On-Board Audio

Already the most well-equipped Slash model offered by Traxxas, the new Slash 4X4 Ultimate now includes On-Board Audio. The Traxxas On-Board Audio System brings the sound and excitement of full-size 900 horsepower Traxxas team trucks to your track or backyard. …

Read More »

AVID’s new Black Anodized Aluminum B6 Clamping Hex Adapters

In a world of racers who love bling and upgrades, racers can now outfit their Team Associated B6 / B6D in style with these AVID black anodized 12mm clamping hex adapters. AVID clamping hexes are made of 6061-T6 aluminum and …

Read More »

Integy’s new T10 Billet Machined Axial SCX-10 complete axles

Integy has unleashed their latest in a long line of billet machined option parts for crawler enthusiasts. These are the new Billet Machined T10 Front and Rear Complete Axles designed to upgrade your Axial SCX-10 Honcho, Dingo, Jeep, or other custom 1/10-sized …

Read More »