Monday, June 17, 2019
Home » News » Elite ESC! The RS Gen3 From Team Tekin

Elite ESC! The RS Gen3 From Team Tekin

Elite ESC! The RS Gen3 From Team Tekin! The RS GEN3 brings a suite of enhanced features including better power handling and improved tuning features that give you unmatched adjustability. Maintain superior control in all situations with state-of-the-art components, award-winning performance and proven reliability. The RS GEN3 gives you the tools to win!

Standard features include an updated HD solder post design for easy soldering, a High Voltage BEC and HotWire compatibility for extensive tuning. Next generation components put more power at your disposal and new firmware make the RS GEN3 our smoothest, best-driving RS ever.

Team Tekin RS Gen3
Small and packed with features, the Team Tekin RS Gen3 has what you need and more!

 

SPECS
Controls: Forward/Brake/Reverse

Input Voltage: 2S-3S LiPo / 4-9S NiMH-NiCD

Motor Limit Brushless Mode 2S: 8.5T 2-pole 36mm Can

Motor Limit Brushless Mode 3S: 10.5T 2-pole 36mm Can

Motor Limit Brushed Mode 2S: 10T 36mm Can

Motor Limit Brushed Mode 2S: 20T 36mm Can

Max Current: 140amps per phase*

BEC: 6.0v / 7.4v @ 5.5amps

Dimensions: 1.0 x 1.3 x .51″ / 24.5 x 34 x 12.9mm

Weight: .83oz / 23.5g

FEATURES
QuickTune™ One Touch Programming
New HD Solder Post Design
3rd Channel Input for On-The-Fly Drag Brake Adjustments <>
Adjustable Torque Control *
Adjustable Throttle and Brake Frequencies *
​ High Voltage Programmable BEC *
HotWire™ Programming Port *
Data Logging Capability *
Sensor Checker
On-Board Temperature Indicator
​ ESC Self Diagnostics with Error Codes
Fully Proportional Forward/Brake/Reverse
​ Brushless and Brushed Motor Drive
​ Sensored or Sensorless Operation
​ LiPo Safe with Custom Voltage Cutoffs
​ Sensor Plug for Precise Commutation
​ Lightweight Chassis Design
​ HDAC: High Density Copper PCB’s
Ultra-smooth and Precise Throttle and Braking Control

ON BOARD QuickTune™ PROGRAMMABLE FEATURES
DB – Drag Brake (13 steps)
​ BS – Brake Strength (13 steps)
​ LM – Torque Limiter (7 steps)
​ NW – Neutral Width (13 steps)
​ TP – Timing Profiles 5 Preset – 2 Custom*
​ MT – Motor Type
Brushless Modes – FWD Only / FWD-REV / FWD-REV Delay / FWD-REV Delay REV Motor Direction
Brushed Modes – FWD Only / FWD-REV / FWD-REV Delay
​ VC – Voltage Cutoff : 2S, 3S, Custom*

* requires HotWire™ sold separately.

Leave a Reply

Your email address will not be published. Required fields are marked *