These turnbuckles are 0.5mm larger in diameter than stock adding increased strength. You will need to use the included 1/8″ drill bit to enlarge the Tekno Rod End to accept the 3.5mm SUPER DUTY Turnbuckles. Use a paper clip to measure the depth of the ball end and then mark the drill bit accordingly. We recommend drilling by hand but can also be done with a drill that has a very linear trigger. Safe use of power tools is highly recommended.
Lunsford 3.5mm SUPER DUTY Titanium Turnbuckle Set for Tekno EB410
The Lunsford Touch:
– Always and only domestic Grade 5 titanium
– Nano accurate threading process
– Machined from center-less ground titanium
– Manufactured right here at the Lunsford compound
4 – 3.5mm x 40mm SUPER DUTY Titanium Turnbuckles (Front Camber & Steering)
2 – 3.5mm x 55mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
1 – 1/8″ Drill Bit.
1 – Super cool Lunsford decal