Team Associated Announces RC18B2 RTR

Team Associated is proud to bring to you the RC18B2—a 1:18 scale RTR electric 4WD off-road buggy!

The RC18B2 has a newly designed chassis with a fully enclosed, 2-belt drive train system with adjustable slipper clutch that is capable of handling the extreme amount of power that today’s brushless motors and LiPo batteries dish out. Along with durability, the drive train is sealed to help keep rocks and dirt away from all the gears and pulleys.

The RC18B2 comes fully assembled including a painted and decaled buggy body, white dish-style wheels with aggressive mini-pin race tires, factory installed XPS electronic speed controller, Super 370 motor, and the new XP3-SS 3-channel 2.4 GHz radio system. Just charge up the battery and get ready to throw up a big roost! Big-time fun in a small package is what makes the RC18B2 another champion by design!

RC18B2 Features:
• Factory finished buggy body and wing made of durable 0.8mm (0.03”) polycarbonate
• Dish racing wheels come mounted with aggressive mini-pin racing tires
• Molded composite chassis with sealed drive train
• Durable gear differentials with a 2.0:1 ratio gearbox
• 2-belt drive system with slipper clutch for ultimate durability, capable of handling most micro brushless/LiPo combos
• Dual bell crank steering for improved cornering performance
• Newly designed servo saver for optimal straight-line tracking
• Hinged battery strap for quick battery changes
• Complete set of 15 precision ball bearings
• Vertical ball end adjustments with durable fixed-length composite links
• Composite fluid-filled shock bodies with adjustable pre-load
• XP3-SS 3-Channel 2.4 GHz radio system

#20106
RC18B2 2.4GHz RTR
MSRP: $279.99
Availability: May 2010

Discuss this item on the RC Driver Forum

Team Associated Announces RC18T2 RTR

Team Associated is proud to bring to you the RC18T2—a 1:18 scale RTR electric 4WD off-road truck!

The RC18T2 comes loaded with awesome new features including the XP3-SS 3-channel 2.4GHz radio system, a newly designed chassis with a fully enclosed, 2-belt drive train system with adjustable slipper clutch that is capable of handling the extreme amount of power that today’s brushless motors and LiPo batteries can dish out. Along with durability, the drive train is sealed to help keep rocks and dirt away from all the gears and pulleys.

The RC18T2 comes fully assembled including a painted and decaled truck body, white dish-style wheels with aggressive mini pin race tires, factory installed XPS electronic speed controller and Super 370 motor. Just charge up the battery and get ready to throw up big roosts! Big-time fun in a small package is what makes the RC18T2 another champion by design!

RC18T2 RTR Features:
• Factory finished truck body and wing made of durable 0.8mm (0.03”) polycarbonate
• Dish racing wheels come mounted with aggressive mini-pin racing tires
• Molded composite chassis with sealed drive train
• Durable gear differentials with a 2.0:1 ratio gearbox
• 2-belt drive system with slipper clutch for ultimate durability, capable of handling most micro brushless/LiPo combos
• Dual bell crank steering for improved cornering performance
• Newly designed servo saver for optimal straight-line tracking
• Hinged battery strap for quick battery changes
• Complete set of 15 precision ball bearings
• Vertical ball end adjustments with durable fixed-length composite links
• Composite fluid-filled shock bodies with adjustable pre-load
• XP3-SS 3-Channel 2.4 GHz radio system

#20101
RC18T2 2.4GHz RTR
MSRP: $279.99
Availability: May 2010

Discuss this item on the RC Driver Forum

Losi Boss Claws 2.2 Tires w/ Foam in Red Compound

Innovation is not only found in the vehicles produced by Losi, but in every product that we offer and the 2.2 Boss Claws tires are no exception. Utilizing one of the most versatile tread patterns in 1/8-scale off-road racing, the Eclipse tread provides smooth and consistent traction on all crawling surface types while the sidewalls of the Losi Comp Claws finishing out this crawling tire for superior construction and “side hilling” abilities. The Boss Claws were prototyped by the Losi Crawling Team drivers for the World’s competition then perfected by the engineers at Losi to provide the best possible traction on the most diversified ranged of surface types.

Features
-Eclipse tread pattern provides smooth and consistent traction
-5.35 in. tall giving extra ground clearance over other crawling tires
-More precise driving due to less wheel hop caused by larger lugged tires
-Molded using the high traction Losi Red compound for impressive traction and long life
-Oversized memory foam inserts provide extra support to assist the tire conforming to the surface
-Internal sidewall webbing provides ample support for “side hilling” situations

Discuss this item on the RC Driver Forum

Hitec Announces Two Technologically Advanced “Monster Torque” Servos!

HS-7980TH Mega Torque HV Coreless Titanium Gear Servo
HS-M7990TH Mega Torque HV Magnetic Encoder Servo

Both of these powerhouse servos have premium performance and durability that you’ve come to expect from Hitec servos. Each features a 7.4V optimized coreless motor, integrated heat sink case and a top case with two hardened steel gear pins supported by brass axial bushings. These servos are designed with our newest high resolution “G2.5” 12-bit programmable digital circuit and indestructible titanium gears. A revolutionary first for the hobby, the HS-M7990TH utilizes a high resolution magnetic encoder while the HS-7980TH employs a conventional potentiometer.

The HS-7980TH and HS-M7990TH are ideal for high performance giant scale aircraft, truggies and buggies, monster trucks and high performance boats.

Common Features:
• G2.5 12-bit Digital Programmable Circuit
• Titanium Gear Train (MK first gear)
• Ultra Performance Coreless Motor
• Integrated Heat Sink Case
• (8) O-Rings for Water/Dust/Fuel protection
• Dual Ball Bearing Supported Output Shaft
• Standard Plus Sizing
(10% larger than a HS-7955TG)

Estimated Street Pricing:
HS-7980TH - $192.49
HS-M7990TH - $219.99

HS-7980TH
speed @ 6V: 0.20
torque @6v: 528 oz.in
speed @ 7.4v: 0.18
torque @7.4v: 639 oz.in
part#: 37980S
dimensions: 1.72 x 0.88 x 1.57 in
weight: 2.70 oz

HS-M7990TH
speed @ 6V: 0.20
torque @6v: 528 oz.in
speed @ 7.4v: 0.18
torque @7.4v: 639 oz.in
part#: 37990S
dimensions: 1.72 x 0.88 x 1.57 in
weight: 2.70 oz

Discuss this item on the RC Driver Forum

Sneak Peak Photos of CENS New Matrix SC

Not much on them yet other than they will be based on the CEN Matrix Series 5B. The SC will also be available in 4 RTR versions:

• 4wd with Painted and decaled body
• 4wd with Clear Body
• 2wd with Painted and decaled body
• 2wd with Clear Body

Discuss this item on the RC Driver Forum

Kyosho Re-Releases Hang-On Ryder Honda NSR500

Kyosho has re-released its extremely popular Hand On Ryder Honda NSR500 bike for a limited run/time.

Part# 3021B

The ultimate in scale realism! This bike not only leans realistically through the curves, but the rider moves from side to side at the same time! This model is molded for even greater scale accuracy and easier access to radio equipment and mechanical parts. The rider is made from an astounding twenty separate parts for natural movement! Fully functional suspension using sprung front forks and a sprung monoshock swing arm at the rear ensure efficient road holding. Oil filled sprung dampers can be fitted as optional upgrade parts for even better handling on rougher tracks. The powerful Kyosho Le Mans DM20 motor (included) drives the rear wheel via a real chain system. (Optional ballraced motors can also be fitted for even better performance). Each kit includes two gear ratios, allowing you to match the power to the track. A comprehensive sponsor decal sheet is included for both the rider figure and the bike itself, allowing you to create a scale masterpiece that really works! Great looks and fun to drive too!

Just add your radio, speedo and battery and you are off to the races.

Available: April 2010 (Limited)

Features
• S.D.S.S Effect - Steering post swings right and left to realize the amazing S.D.S.S. effect! The relative front and rear movement causes the centre of gravity to shift and generates the bike’s turning force. The rider figure slides left and right over the bike, leaning into turns!

• Cooling Room - The twin-tube style main frame has ample room cooling air to flow down the motor and amp.

• All Access - • Manufactured from strong, reinforced parts, the open frame design allows quick battery changes and easy motor/radio access.

• Mono-Shock Swing Arm - Equipped with monoshock swing arm for fully functional rear suspension.

• Realistic Detail - Power train uses drive chain and sprocket exactly like full scale racing bikes. Leaning Rider mechanism creates a true to life look when the bike turns.

• Available Upgrades - Optional upgrades like oil shocks and strengthened sprocket are also available plus tons more.

What is a KIT? A KIT is a higher level vehicle that included nearly everything you will need to build a rolling chassis. You will need to supply items like ESC, battery and radio equipment. Required items may vary from kit to kit so please see Required Items For Completion section for full list.

Required For Completion
• 2-channel, 1-servo(micro) , 1-amp R/C system for motorbikes (micro).
• 7.2V-270`600mAh Ni-Mh battery
• Battery charger
• Batteries for R/C system

Discuss this item on the RC Driver Forum

Something BIG from Kyosho 5.1.2010!

This is all the information we have at the moment, but I'll bet its something B-I-G!

Discuss this item on the RC Driver Forum

Kysoho America- New Ultima RB5 SP2

The new Ultima RB5 SP2 Edition is the latest in the Ultima line of vehicles, which is a further development of the breed, and it includes all the enhancements that have been designed by Kyosho engineers and tested over the last couple of years by Kyosho International factory drivers like Jared Tebo and legends of the RC world. This type of development, along with the uncompromising manufacturing standards and the vast experience that can only be gained from decades of high-level competition, makes the Ultima RB5 SP2 a strong choice as the car to beat for the 2010 season.

Available: Mid March 2010

RB5 SP2 New Features
• New Revised Rear Suspension Arms - The RB5 SP features rear suspension arms that are 2mm longer than the arms used on the original buggy. The longer arms, combined with other changes made to the rear suspension, give the SP2 better and more consistent traction through the corners and better bump handing, especially on high-bite tracks.

• Rear Suspension Mounts and Transmission Housing - The lower rear suspension mounts on the chassis are revised to accommodate the longer suspension arms. The IFMAR legal maximum width is maintained by moving the suspension mounts 2mm towards the center of the chassis. The transmission housing is also modified to fit the new suspension mounts. The entire transmission housing has shifted left to cancel any counter torque effect for more precise control!

• New Sword Body - Chiseled lines combine with smooth, flowing sections to create a body that is not only attractive and boldly styled, it also provides greater down-force in combination with a medium rear wing for increased traction and greater high-speed stability.

• Medium Size Step Wing - A medium sized step wing is included with the new Ultima RB5 SP2 for better overall control.

Standard Features
• Low Profile Rear Shock Tower - Reducing the height of the rear shock tower slightly lowers the center of gravity, which improves cornering ability, and by reducing the height of the shock tower in relation to the wing and wing mount, it offers addition protection against crash damage.

• Velvet Coated Shocks - Kyosho is well known for silky smooth shocks and the new Triple Cap shocks included with the new Ultima RB5 SP2 are no exception. The shock body consists of three major components a top cap, velvet coated threaded bodies, and a lower cap. The velvet coated shock bodies feature a threaded spring pre-load collar for quick and easy adjustment. The threaded adjuster features an O-ring that prevents the preload settings from moving, which ensures consistent performance from start to finish. The lower shock cap allows for quick and easy maintenance of the double O-ring seals.

• Hard Rod Ends - The rod ends feature a new, stronger material that is more durable and resists contamination from dirt. This means that the rod ends stay tighter and are less likely to be damaged or separate from the ball stud in the event of a hard crash.

• Revised Rear Hubs - Factory drivers have determined that only one of the hinge pin holes was ever used in the original RB5 wheel hubs, so the extra hole was eliminated for the new SP Edition. Combined with a new, more durable material, these hubs are not only much stronger, they're also lighter and the new geometry produces more stable handling characteristics

• Orange Front Shock Springs - The kit now includes the popular orange front shock springs, which produce better suspension action over the bumps and more precise steering control in the corners.

• Carbon Conposite Chassis - specially formulated carbon fiber composite for the best balance of performance and durability.

• Transmission - Features an externally adjustable three-gear design with an internal ball differential that uses standard 3/32inch diff balls and 1/16inch thrust balls. Includes tight-fitting molded dust cover to protect pinion and spur gear.

• Rear Suspension Symmetry - The arms are symmetrical so a single replacement arm can be used on either side of the car. The inside of the arms are attached to the chassis using separate suspension mounts, which will allows anti-squat adjustment. Vertical ball studs for both ends of the upper link suspension geometry can be fine-tuned with shims.

• Front Suspension - Long suspension arms connect to a narrow front mount, which can be set for 25 or 30 degrees of hinge pin angle. Like the rear arms, a single replacement arm can be used on either side of the car.

• Chromemoly Turnbuckles - Use of a stronger material means the new turnbuckles can be made lighter and stronger than the original steel turnbuckles. The new turnbuckles feature a 3mm square adjuster, which further reduces weight.

• Offset steering hubs - Floating axles ride in bearings that are mounted in the hub for more responsive suspension. The front track width is also easily adjusted.

• 12MM Hex Wheel Hubs - 6 contact points spread the load on the wheel to prevent stripping and the larger, flat mounting surface keeps the wheels running straight and true.

• Steering Assembly - Steering bellcranks are mounted on the chassis at the same angle as the suspension arms to eliminate bump steer and produce more accurate Ackerman geometry throughout the entire range of steering motion.

• Captured Hinge Pins - The hinge pins are much more secure and less likely to come loose.

• Low Profile Shock Towers - The front shock tower is mounted as far back on the chassis as possibly, as are the shocks, to keep the mass as low as possible.

What is a KIT?
A KIT is a higher level vehicle that included nearly everything you will need to build a rolling chassis. You will need to supply items like motor, ESC, battery, tires and radio equipment. Required items may vary from kit to kit so please see Required Items For Completion section for full list.

Required For Completion
• R/C System / 2-channel, 1-servo system for cars, 1 ESC and motor.
• Tires / Tire insert
• 7.2V Ni-Cd/ Ni-MH/ Lipo battery
• Battery Charger NiMh or Lipo
• Batteries for R/C system

Discuss this item on the RC Driver Forum

Sensational New Servos from Spektrum

Help your customers complete their radio systems the right way with affordable Spektrum™ servos. Along with complementing Spektrum's 2.4GHz DSM® technology, these four new servos further Spektrum's commitment to offering solutions to modelers from all segments of the RC world. Instead of settling for after-market or budget servos, they can now have their entire onboard radio system made up of quality Spektrum components.

• The H3000 is a high-speed, high-performance CCPM servo for 250-to 450-size helicopters
• The H6010 has a durable metal gear train perfect for 30- to 50-size heli CCPM and throttle applications
• The S6030 is a high-torque servo that's a perfect fit for 1/10-scale monster trucks and buggies
• The S6040 is a high-speed surface servo for use in 1/10-scale trucks and buggies

SPMSH3000 H3000 Sub Micro Digital Heli Servo
SPMSH6010 Standard Digital Sport Servo – Air (SC-0352)
SPMSS6030 Digital Surface Servo – High Torque
SPMSS6040 Digital Surface Servo – High Speed

Discuss this item on the RC Driver Forum

Team Losi Differential Spool Insert

Increase Acceleration and Top Speed in any 8IGHT™ Vehicle

The Differential Spool Insert (LOSA3609) replaces the spider gears in the center differential of any 8IGHT vehicle to easily convert the differential to a spool drive where both wheels are driven equally at the same time. The insert is precision machined to keep perfect alignment between the front and rear outdrives and has been lightened to further minimize rotating weight. The overall result translates into quicker acceleration and higher top speed.

• A small and inexpensive option part that drastically changes the performance characteristics of any 8IGHT vehicle
• Better acceleration and drive under certain conditions courtesy of full-time drive to both wheels
• Simple to use and easily installs in minutes

LOSA3609 Differential Spool Insert

Discuss this item on the RC Driver Forum

Hitec’s Aggressor SRX Pro

Hitec announces our advanced surface radio, the Aggressor SRX Pro. Our radio utilizes Hitec’s 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology for a rock solid signal in a 3-channel pistol grip computer radio system. Equipped with 10-model memory and four character naming, the SRX Pro is all you need to run your entire fleet of cars, trucks, buggies and boats.

Features: 2.4GHz DSSS, Dual Mode 3-channel, 7ms High Response Mode, Progressive Spring Steering, 10-Model Memory, 4-Character Naming, Brake ATL Switch, and Steering Wheel Tension Adjust.

Programmable Features: Steering Dual Rate, Steering and Throttle Exponential Rates, End Point Adjustments, Idle Up, Adjustable Steering, Brake and Acceleration Rates, Servo Reversing and Sub Trims for easy set-up.

The Aggressor SRX Pro Value Combination package includes the transmitter with 2 Atom 3 Micro Receivers. Street Price: $191.39 Additional servo and receiver combos are also available.

Discuss this item on the RC Driver Forum

MaxAmps 3 Year/300 Cycle Guarantee Now FREE!

All MaxAmps.com lipo packs now include a 3 year 300 cycle warranty FREE OF CHARGE. You can rest assured knowing that we will be here 7 days a week to help you with any technical support or warranty needs. No other battery manufacturer even comes close.

In addition, the MaxAmps Green Series packs include a 5 year 1000 cycle warranty FREE OF CHARGE.

See the warranty section at MaxAmps.com for more details.

Discuss this item on the RC Driver Forum

Novak’s Ballistic 550 Brushless Motors

Novak’s Ballistic 550 Brushless Motors (#3504-#3506) are the first 550-sized motors to break into short course competition and easily outperform traditional 540-sized motors. The Ballistic 550s are so powerful because of their extra long stator and rotor magnet. In fact, the stator and rotor magnet are twice the length of 540-sized motors, giving them twice the torque of an equivalent 540 motor. Additionally, these larger-sized motors run cooler and more efficiently than their 540 counterparts. These high-powered machines are the motors of choice at small, indoor race tracks and easily install into OFNA’s® Hyper 10 SC Pro 4x4 Kit™, OFNA’s® Jammin’ SCRT 10 4X4 Kit™, Traxxas’® Slash 4X4 4WD Short Course Trucks™ and many other 1/10-scale short course trucks.

And like the Ballistic name implies, these motors are completely rebuildable and feature interchangeable wound stator construction. There are four Ballistic 550 Wound Stators (#S6504-#S6507) available with more to come!

The Ballistic 550 Brushless Motors and Ballistic 550 Wound Stators are scheduled to ship in May 2010.

Discuss this item on the RC Driver Forum

Traxxas Releases Wheelie Bar for 1/16 E-Revo

How do you like your wheelies? Whether you like to ride with the front wheels held high for show-stopping stunt maneuvers or prefer to keep ‘em low for locked-in launches, Traxxas’ new adjustable wheelie bar for the 1/16 E-Revo puts you in control. The wheelie bar’s unique, patent-pending design is easy to install for controlled wheelies on demand. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it’s time to head off road, the wheelie bar can be easily removed with just two screws.

Wheelie Bar Features
• Installs easily in minutes
• Patent-pending design, rugged construction
• Four snap-in positions for variable wheelie angles
• Easily removed for off-road running
• Replaceable wheels
• Includes installation hardware and instructions

Part #:7184
Description: Wheelie bar, assembled (fits 1/16 E-Revo and 1/16 E-Revo VXL)
Price: $15.00

Discuss this item on the RC Driver Forum

Traxxas Releases 1/16 E-Revo Extended Wheelbase Suspension Arms

Add 10mm of wheelbase extension to 1/16 E-Revo in just minutes! Lengthening the wheelbase of your 1/16 E-Revo allows you to accelerate hard through the roughest track sections with increased stability and confidence. The longer wheelbase also helps keep E-Revo planted for holeshot launches and full-on power through the turns. Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the extended rear arms allow the wheelbase to be quickly tuned for various track conditions.

1/16 E-Revo Extended Wheelbase Suspension Arm Features:
• Lengthens wheelbase by 10mm
• Easy to install
• Increased stability over rough track sections
• Planted acceleration
• Genuine Traxxas precision and quality

Part #: 7132R
Description: Suspension arm set, rear, extended wheelbase (lengthens wheelbase 10mm) (includes upper right & left and lower right & left arms) (1/16 E-Revo)
Retail Price: $8.00

Discuss this item on the RC Driver Forum

Seven New Tires Released by Proline!

Trencher SC 2.2"/3.0" Tires (M2 Compound) for Slash® 2WD/4x4, Slayer®, SC10 and Blitz Front or Rear
Part #: 1159-01

Bow-Tie SC 2.2'/3.0" Tires (M4 Compound) for Slash® 2WD/4x4, Slayer®, SC10 and Blitz Front or Rear
Part #: 1153-03 M4, Super Soft

Caliber SC 2.2"/3.0" Tires (M4 Compound) for Slash® 2WD/4x4, Slayer®, SC10 and Blitz Front or Rear
Part #: 1156-03 M4, Super Soft

Caliber Off-Road 1:8 Buggy Tires (M4 Compound) for Standard and V2 Buggy Wheels
Part #: 9030-03 M4, Super Soft

Hole Shot Off-Road 1:8 Buggy Tires (M4 Compound) for Standard and V2 Buggy Wheels
Part #: 9026-03 M4, Super Soft

Recoil Off-Road 1:8 Buggy Tires (M4 Compound) for Standard and V2 Buggy Wheels
Part #: 9034-03 M4, Super Soft

Big Joe 3.8" (40 Series) Tires Mounted on Tech 5 Black Wheels for 17mm Hex Monster Trucks
Part #: 1103-13

Discuss this item on the RC Driver Forum

Tamiya TRF 2WD Buggy Prototype in the Works!

This exciting new prototype will be featured in the May issues of Japanese R/C enthusiast magazines RC Magazine and RC World (both on sale in early April). Although it is still undergoing development and the specifications have not been finalized, here is a brief glimpse of the machine.

Specifications
● Chassis with longitudinal battery layout.
● Equipped with slipper clutch and ball differential.
● Front and rear long-span suspension.
● Front and rear aeration dampers.
● Fitted with Wide Operation Angle (WO) universal shafts.
● Specially-designed body and rear wing.
(Further details will be released at a later date.)

This machine was entered in the Yatabe International Offroad Grand Prix 2010 in Japan, and at the hands of TRF driver Satoshi Maezumi, achieved 1st place in one of the heats on its debut. It was also raced by new TRF driver Lee Martin (UK) at the recent Cactus Classic off-road race in the United States, where it placed a respectable 11th against the local favorites.

More details regarding this incredible new machine will be announced as we approach the Shizuoka Hobby Show!

**** NEW INFORMATION ****

This just in from Tamiya:

1/10 scale electric powered 2WD buggy class is one of the most exciting categories of R/C competition today. Tamiya now proudly enters a new buggy chassis, the TRF201, to challenge that class all over the world!

About the Item
-This is a 1/10 R/C assembly model kit.
-Newly designed bath-tub type chassis with the motor mounted at rear.
-Chassis features a newly designed underside shape for an improved center of gravity whilst providing sufficient ground clearance.
-Newly designed sealed gearbox comes equipped with a ball differential.
-Newly designed front suspension arms are specific to 2WD buggies.
-Servo saver with built-in steering crank.
-Fully adjustable suspension.
-Includes aeration dampers for off-road cars.
-Traction control slipper clutch.
-Included front wheels are specific to TRF201 (compliant with IFMAR regulation).
-Included rear wheels are common to those from DB01 and TRF511.
-Rear universal shafts.
-Body, rear wing, tires, motor, and R/C unit sold separately.
-Please note that TRF201 has nothing in common with the DT-02. (Desert Gator)
-For information on new Spare, Option, and Limited Edition parts for TRF201 buggy chassis, refer to the following pages.

Gearbox
Gearbox is equipped with a ball differential which features inch sized diff. balls (12pcs.), 2.6mm dia. diff screw, and newly designed thrust ball bearings. Diff. carrier features a new teeth shape to ensure a long-lasting performance. Suspension is fitted with assembly universal shafts.

Front End
Aeration dampers feature new coil springs. Suspension has been designed to achieve excellent handling performance. Front axles are compatible with wheels using metric size ball bearings (For information on front axles for wheels using inch size ball bearings, refer to Item 54220).

Body and Wing
The separately available body has aerodynamics that will assist in providing superior control over your machine and features a beautiful flowing design. Separately available wing set comes with 2 kinds of wings to further customize your settings. (Refer to next pages for information regarding the body and wing set respectively)

Chassis
Chassis frame is made from fiberglass reinforced nylon resin and features a longitudinal battery position. Rear section is designed for optimized chassis roll balance. Chassis shaped is designed for an improved center of gravity whilst providing sufficient ground clearance.

Discuss this item on the RC Driver Forum

LRP Quadra Pro 2 Charger

The Quadra Pro 2’s intuitive menu structure makes the versatile functions easy to use! Whether you want to adjust the parameters, set your user profiles, or condition your batteries – the Quadra Pro 2 Charger is always a good choice.

Charge NiMH - LiPo – LiFePo - NiCd
• Adjustable fast charge from 0.1 to 5.0A: 1-14 cells NiMH/NiCd with adjustable Delta-Peak detection, 1-5 cells LiPo/LiFePo with automatic LiPo/LiFePo cut-off.
• Autostart-Timer and Partial Charge Mode for maximum comfort and longest cell lifetime.

Cycle NiMH - LiPo – LiFePo - NiCd
• Automatic Cycling Mode (Discharge - Charge - Discharge) for perfect conditioning of your batteries.

Discharge NiMH - LiPo – LiFePo - NiCd
• Adjustable discharge current (0.1 to 1.0A) and discharge cut-off voltage.

Features:
• Integrated LiPo Balancer: The LiPo Battery Balancer is specially developed for the use with LiPo and LiFePo batteries. It automatically detects cell condition for all 2-5 cell batteries. If the difference between the cells is more than 5mV the adaptation starts automatically.
• Dual Input: Integrated AC power supply, worldwide use with 100-240V. DC input (11-15V) for flexible use with car battery.
• Fully Adjustable: Intuitive program structure allows precise adjustment of all parameters (NiMH-NiCd-LiPo-LiFePo / Charge Current / Trickle Current / Discharge Current / Discharge Cut-Off Voltage / Delta-Peak).
• User Profile Memory: 3 factory pre-set profiles which can be customized and saved in memory.
• Blue backlit LCD Display: Two-line 16-character laser-blue backlit LCD display acts as perfect user interface. Easy access to all performance and safety data.
• Microprocessor Controlled: Fully adjustable for perfect operation, maximum performance, and highest safety.
• Multi Protection System: 100% protection against output reverse polarity, short circuit, input voltage error, and overcharge.
• Plug in and Charge: Includes all input (AC + DC) and output cables and connectors.

LRP Quadra Pro 2 Charger MSRP $259.99

Discuss this item on the RC Driver Forum

Team Associated Releases SC10 Factory Team Kit

After winning the R.O.A.R. Short Course Nationals Team Associated’s engineers got to work on taking the SC10 to the next level. Improvements were made to enhance performance and durability, as well as applying the full Factory Team treatment! The result is the SC10 Factory Team Kit; a 1:10 scale electric 2WD off road short course competition race truck kit!

Based on the 7-time R.O.A.R. National Champion RC10T4, the engineers of Area-51 configured the SC10 for all out racing. The SC10 Factory Team kit is loaded full of high performance features including JConcepts Subcultures rear tires, Factory Team V2 threaded shocks, V2 slipper clutch, ball differential with lightened outdrives, and an optimized setup to make the best handling SC10 to date!

SC10 Factory Team Kit Features
Option parts included in the SC10 Factory Team:
• ’09 Championship Body with decal kit
• JConcepts Subcultures SCT rear tires with molded foam inserts (1 pr.)
• Ball differential with lightweight outdrives
• Factory Team V2 dual-cap hard-anodized shock bodies with threaded collars
• Bleed-screw shock caps
• Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
• Carbon-fiber battery strap
• CVA joints with pin retainer clips
• V2 slipper assembly with high-rate spring and Factory Team Gold pads
• Factory Team blue Titanium Turnbuckles
• Factory Team blue milled motor plate
• Factory Team blue aluminum servo mounts
• Factory Team blue aluminum wheel spacers
• Factory Team blue aluminum hinge pin brace
• Factory Team blue aluminum shock bushings
• Factory Team blue aluminum shock pivot balls

SC10 Factory Team Additional Kit Features:
• Factory Team blue aluminum screws for body mounts
• Factory Team blue cone washers for top plate Factory Team blue aluminum servo saver nut
• Gray Rear and Red front shock springs
• Updated suspension settings for Short Course racing
• Updated chassis and front suspension arms for increased durability
• Updated rear wheels with more drive pin support
• Built on 7-time National Champion RC10 T4 platform.
• Realistic Short Course Racing Truck 0.040” polycarbonate body
• KMC-style wheels, front and rear
• SC10 all-terrain front tires with molded inserts
• Realistic bumpers front and rear for maximum durability
• Rubber AE logo mud flaps
• 2.6:1 ratio Gearbox equipped with sealed gear differential
• Complete set of precision ball bearings
• Fully adjustable camber and toe-in
• Angled bell crank “co-planar” steering with built-in servo saver
• Vertical ball end adjustment, front and rear
• 30° caster blocks

#7034
SC10 Factory Team Kit
MSRP: $409.99
Availability: June 2010

Discuss this item on the RC Driver Forum

LRP 2in1 LiPo Guard + BEC

The LRP 2in1 LiPo Guard + BEC is the perfect tool for monitoring your R/C car. Now all drivers can use the power of 2S, 3S, and 4S LiPo batteries.

The 2in1 LiPo Guard + BEC makes every brushless and brushed speed control compatible with LiPo batteries. During operation the 2in1 LiPo Guard + BEC monitors the LiPo batteries at all times, so they are never over discharged.

In addition, the LiPo Guard features a strong 6V/5A BEC. The built-in BEC in speed controls can be too weak and is not designed for high input voltage, such as 3S or 4S. That´s where the 2in1 LiPo Guard + BEC comes into play and does all the work!

Features:
• 2in1 Device - LiPo Guard and BEC
• Makes every brushless and brushed speed control LiPo battery compatible!
• Works with 2S, 3S, and 4S LiPo’s
• Protects the LiPo batteries from being over-discharged
• Individual adjustable LiPo cut-off voltage
• Strong 6V/5A switching BEC built in

LRP45050 LRP 2in1 LiPo Guard + BEC MSRP $69.99

Discuss this item on the RC Driver Forum