Subscribe to our RssFollow us on Twitter!Follow us on Facebook!Check out our Youtube!

Tag Archives: 'rc8.2'

Avid RC8.2 Carbon Rear Chassis Brace Support

Avid RC8.2 Carbon Rear Chassis Brace Support

The AVID RC8.2 Carbon Rear Chassis Brace Support AV1803 is designed to help prevent the breaking/tearing of the stock molded RC8.2 brace which is used in the RC8, RC8B, and RC8.2. The molded brace offers the [...]

Vertical Caster Blocks and Spindle Assembly for the RC8.2, RC8T CE and SC8.2e

Vertical Caster Blocks and Spindle Assembly for the RC8.2, RC8T CE and SC8.2e

Team Associated is ready to release these new caster blocks and spindles for their 1:8 series of vehicles. [...]

RC8.2 1mm Offset Insert Bushing -1 Dot by Avid

RC8.2 1mm Offset Insert Bushing -1 Dot by Avid

AV1804 series of 1mm Offset Insert Bushings allow for a new range of tuning using your kit supplied suspension mounts. Avid is currently offering the 1 Dot version which is the standard insert used in the [...]

Proline Updates the Bulldog Body for 2012

Proline Updates the Bulldog Body for 2012

Preparing for the 2012 IFMAR World Champs later this year, Ryan Cavalieri has teamed up with Proline to develop a 2012 version of the Bulldog body for his Team Associated RC8.2 Buggy. The Bulldog has been [...]

Team Associated RC8.2 Build – Wheels and Tires

Team Associated RC8.2 Build – Wheels and Tires

The Build – Part 12 Here we go, the final step. We are only showing the tires mainly because the body is a pretty simple step and requires painting (which we can’t help you with). [...]

Team Associated RC8.2 Build – Engine and Fuel Tank

Team Associated RC8.2 Build – Engine and Fuel Tank

The Build – Part 11 Installing the engine and fuel tank are pretty easy. We will also be covering the assembly of the clutch to the engine which can be a little more detailed. Your clutch [...]

Team Associated RC8.2 Build – Linkage

Team Associated RC8.2 Build – Linkage

The Build – Part 10 The throttle linkage can be a bit tricky on nitro powered vehicles. Once set, however, you should not have to adjust it again. The RC8.2 also features an adjustable brake bias. [...]

Team Associated RC8.2 Build – Radio Tray

Team Associated RC8.2 Build – Radio Tray

The Build – Part 9 The radio tray is the heart of your RC8.2. This tray is connected to the chassis with 6 screws. Removing these 6 screws will allow you to quickly remove the tray [...]

Team Associated RC8.2 Build – Shocks

Team Associated RC8.2 Build – Shocks

The Build – Part 8 The Factory Team RC8.2 comes with a killer set of threaded shocks. They build easily and require very little maintenance unless, of course, you prefer to rebuild after every race day. [...]

Team Associated RC8.2 Build – Center Differential

Team Associated RC8.2 Build – Center Differential

The Build – Part 7 The center differential assembly is a pretty straightforward step. Since we already built the center diff, it’s must a matter of assembling the mount and attaching it to the chassis. Build [...]