This is a Pro-Line Enforcer Clear Body for AE T5m. Attention Stadium Truck Fans! Pro-Line has a brand new aftermarket Truck body: The Enforcer! Originally from the mind of World Champion Pro-Line Driver Ty Tessmann and inspired from the success …
Read More »Tag Archives: t5m
CVA Axle Shims For The B5M, T5M, or SC5M
Use these shims in your B5M, T5M, or SC5M when you want to run maximum droop and keep the dogbones securely in place when using the #91608 Factory Team Aluminum +4 Arm Mount. Click here for more info –
Read More »MIP 17.5 Eco All-in-1 Topshaft for the B5, B5M, B5M Lite, T5M & SC5M
The MIP 17.5 Eco All-in-1 Topshaft works with the original 3-gear rear motor, 4-gear mid motor, 4-gear V2 mid motor, 3 gear mid motor, and the MIP Box. The contact surface is 30% narrower than normal, equating to less overall drag/contact patch on …
Read More »Team Associated FT Front Bulkhead Parts for the B5, B5M, T5M, SC5M
Team Associated has released a set of tuning aids for the B5, B5M, B5M-FL, T5M and SC5M vehicles. These pieces include a pair of front aluminum bulkheads – 25° and 30° – that weigh in at 15g each. A separate …
Read More »Exotek Aluminum Spring Perches
Exotek has released a set of spring perches that replace the stock parts on the B5, B5M, T5M and B44. These alloy parts have been designed to hug the shock shaft and help prevent them from ejecting off the shocks …
Read More »MIP Bypass1 Team Tuned Kit for the T5M and SC5M
Adjust the rebound and compression separately similar to the way you would a real vehicle with MIP Bypass1 Team Tuned Kit for the T5M and SC5M. The all new piston features a new design that provides much more initial pack …
Read More »Pucks 17.5 Bi Metal R-CVD Drive System for the T5M from MIP
MIP’s Bi-Metal R-CVD’s for the T5M features a keyed joint made out of hardened alloy steel that connects to 7075 hard anodized aluminum. This feature allows you to lighten up the drivetrain without sacrificing the durability that steel components offer. …
Read More »Pro-Line BullDog Mid Motor Clear Body for the T5M
The new T5m BullDog features 2 Mohawks down the center of the roof that improves high-speed stability and adds an aggressive look. The front and rear end geometry have also been reshaped and improved to achieve higher front down force …
Read More »Schelle Racing B5/B5M/T5M Aluminum Rear Hubs
Schelle has reinvented the rear hub with the release of these unique parts for the Team Associated B5, B5M and T5M. Machined from aluminum, these hubs feature a symmetric lower part that can be used on either the left or …
Read More »Team Associated FT Parts for the B44, B5M, and T5M
Team Associated has added a few Factory Team parts for the B44, B5M and T5M. These include a 3° aluminum toe plate for the B44, an aluminum C and B arm mount and clamping wheel hexes for the B5M and …
Read More »It’s Here! Team Associated’s T5M
Ok, let’s have a show of hands as to who is surprised by this release? If you put your hand up, it’s time to get outside! The A-Team’s B5 and B5M have been huge releases in the RC industry, paving …
Read More »