Introducing the SMC Totemic Stock motors. After an intense development program, SMC has boiled down the multiple motor parameters to one configuration. The motor excels at 2S, 1S and oval. The stator is made of premium stator steel with high …

Revolution Design Racing Products have introduced their new Brass Electronic Mounting Plate for the Team Associated B6 buggy. It adds a total of 53g in the most central part of the chassis. The 2mm plate is 0.5mm thicker and 17g …

702 RC Raceway in Las Vegas, Nevada is getting set to host the 2nd Annual Las Vegas On-Road Carpet Championship! The Las Vegas On-Road Carpet Championship (One Day Event) will be held January 21, 2017. Local sponsors include Majestic Restoration and …

New from Yeah Racing is the all-new Cantilever Suspension Kit for the Axial SCX10 and SCX10 II. The new suspension is designed in collaboration with Dinky RC, and allows the use of flat beds, full drop beds, and increased interior …

XRAY has just released their new front sway bars for the XT2 stadium truck. The new sway bars are made up of specialty spring steel and are available in 1.2, 1.4, 1.6, and 1.8mm thicknesses to precisely tune your ride! …

After years of hard work and support, Mammuth Works is pleased to announce The Rewarron 1/3 scale R/C trophy truck is now available for pre-order. This beast of a machine features a 270cc four stroke engine and weighs in at nearly …

Chicago’s newest R/C race facility, Windy City RC Raceway & Hobbies, is preparing for the inaugural Winter Classic presented by MOTIV and Gravity RC. This multi-day event will take place January 20-22, 2017. Friday – Practice 8am to 10pm Saturday …

I cannot think of any other vehicle that got as much attention as the original Traxxas XO-1 when it was released just a couple of years ago. This 1/7-scale on-road monster caught everyone off guard with its unique chassis design and a Castle Creations powered system that could propel this car up to 100 mph in just a few short seconds.

3DRC has designed this stylish new steering wheel to fit Sanwa M11 and M12 transmitters. While this new wheel may not improve your driving ability, it will certainly improve the look of your radio! The new 3DRC wheel is 3D …

175RC.com has just released their new B6 Carbon Fiber Motor Plate with integrated gear guard design. This lightweight option is machined from high quality 3mm carbon fiber, and is designed to be one of the lightest motor plates on the …

Avid has unveiled their new Team Associated B6 Shock Standoffs. These new standoffs are a direct replacement for the kit standoffs, including 2 front (short), 2 rear (long) standoffs, and 4 Delrin™ pivot bushings. They are made of black anodized …

XRAY has just released their new aluminum X12’17 chassis and rear pod. The new CNC-machined 2mm Swiss 7075 T6 aluminum design is intended to increase traction, stability, and steering. XRAY says the new chassis and read pod lower plate provides …

1/10 offroad racers are now in luck, as HUDY has expanded their stylish car bag lineup to include a fresh new bag specifically for 1/10 scale offroad vehicles! The new bag features signature HUDY graphics, high quality European materials, padded …

Revolution Design Racing Products (RDRP) continues their ongoing pursuit of options for the Team Associated B6 platform. The newest being this all-new brass front bulkhead. This is a direct replacement for the kit’s plastic bulkhead, but it offers an increased …

Upgrading Traxxas models to LiPo power is now easier than ever! The new Traxxas 2s Single Battery & Charger Completer Pack (#2992) provides the perfect balance of runtime and power for popular 1/10 scale models including the Traxxas Stampede, Slash, …