If you’re into 1/10-scale RC crawling, you know that body shells popping loose during rough terrain or rollovers is a common—and frustrating—issue. Pro-Line has a smart solution for that with their Universal Body Capture Slider Set, designed to fit a wide range of popular crawler platforms including Axial, Redcat, Vanquish, and more. Whether you’re running a fully built custom rig or keeping things stock, this upgrade adds durability, scale detail, and real functionality to your crawler. We recently installed it on an Axial Deadbolt to see how it performs—and the results speak for themselves.
PRODUCTS FEATURED
ProLine Universal Body Capture Sliders*: https://alnk.to/cHOOg16
*Fits Most 1/10 RC Crawlers
Product Overview: Pro-Line Universal Body Capture Slider Set
Pro-Line has built a strong reputation for innovative RC accessories, and this new universal slider set continues that tradition. Designed to fit a variety of crawlers—including Axial, Vanquish, Redcat, and more—this set replaces your truck’s stock rock sliders or floor plates with a much more functional and refined setup.
The key feature? Body retention. This system includes steel capture plates that prevent your body shell from popping out during rollovers or rough crawling. The sliders still serve their traditional role—gliding over rocks—with the added durability of stainless steel inserts.
Here’s what comes in the kit:
-Base mounting plates with universal fitment holes
-Extension plates to accommodate different body widths
-Stainless steel wear plates for added durability
-Upper support plates that can also be used to mount battery straps
-Side body capture plates etched with the Pro-Line logo
-It’s a sleek, functional upgrade that not only improves body stability but adds to the rig’s rugged looks.
Installation Notes
-Installing the slider set on the Axial Deadbolt is relatively straightforward, though a few steps require some planning.
-Remove the stock slider plates. These come off easily with basic hex tools.
-Determine extension length. Use the supplied plates to span the gap between the chassis and body. Multiple lengths are included—test-fit to get the perfect match.
-Bolt it all together. Pro-Line supplies all necessary hardware. The driver’s side sits at a slight angle, so a ball-end hex driver helps.
-Install the stainless steel wear plate. Secured with three screws, it’s not just functional but adds serious visual appeal.
-Attach the top and side plates. The upper plate bolts in with three screws and creates room for optional side-mounted battery straps. The side plates form a “pocket” that holds the body shell in place.
-Some minor trimming may be needed depending on your body, as was the case with the Deadbolt. The result, however, is a much more secure shell fitment—even after flips and rollovers.
Final Thoughts
This Pro-Line slider set is more than just a cosmetic mod—it’s a functional upgrade that enhances durability and ease of use. On the Axial Deadbolt, the fit was excellent with just a bit of body trimming required. The stainless steel plates not only improve performance over rocks but also give the rig a polished, high-end look. The side guards do exactly what they’re supposed to: lock in the body shell and keep it there.
If you’re running an SCX10, Vanquish, Redcat, or another popular crawler chassis and you’re tired of popped-out body panels during trail runs, this upgrade is a no-brainer.
Highly recommended for any serious scaler.
Get yours from Pro-Line today: https://alnk.to/cHOOg16
Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Products shown may have been submitted by the manufacturer for review. The manufacturer has accepted our terms of providing an unbiased review to our audience. This content may also have been produced with the assistance of AI.
