1RC Racing 1/18th Racer Kit And Pit Tools

Paul Onorato August 27, 2025 News

Check out the new 1RC Racing 1/18th Racer Kit and pit tools including the shock assembly tool and pit tray.

1RC1089 – 1/18th Racer Kit

The 1RC Racing Racer Kit includes all the essential components needed to build your car in one of four configurations: Asphalt Late Model, Asphalt Truck, Dirt Street Stock, or Dirt Late Model. Before you start assembling, choose your preferred 1RC Racing motor, servo, battery, transmitter, receiver, body, wheels, and tires then start building. Each kit comes with a 1RC Silicone Parts Tray (1RC8822) to help you keep track of all the hardware during assembly, along with a 1.5mm aluminum handle wrench. Once you’ve completed your car and added a decorated body, you can admire your work on the included foam car stand and prepare to hit the track! Take advantage of stock these with the upcoming racing season with a ton of potential up-sell opportunities with bodies, tires, and electronics.

Package Includes:

Unassembled Racer Kit
1RC7025- Servo Wire Extension
1RC8810 – 1.5mm Hex Driver, Long, Mini Handle, Black
1RC8822 – Pit Tray, Gray
1RC9009 – Foam Car Stand, Black
Combo 3mm/4mm Nut Driver
Detailed step-by-step assembly manual

Required for Completion:

Transmitter
Receiver
Battery
Charger for Battery
1RC Racing Servo
1RC Racing Motor
> 8700Kv
> 10000Kv
1RC Racing ESC
1RC Racing Tires
1RC Racing Body
> Asphalt Late Model Body
> Asphalt Truck Body
> Dirt Late Model Body
> Dirt Street Stock Body

1RC Racing 1/18th Racer Kit And Pit Tools

1RC8821 – Shock Assembly Tool

The 1RC Racing Shock Assembly Tool is an essential accessory for anyone looking to enhance the performance of their 1RC Racing Car. This new tool is compatible with all 1RC Racing 1/18th shocks and is built from durable 6061 aluminum. It features a sleek black anodized finish and laser-etched markings. This versatile tool serves multiple functions. It allows you to easily install and vent shock caps using the included 1mm drill bit and aluminum guide. Additionally, the Shock Assembly Tool lets you adjust the shock length to our recommended settings of 6.7mm, 7mm, and 7.3mm, using the included flat blade screwdriver. You can fine-tune the down travel to ensure that all four shocks are equal in length, ultimately providing optimal performance for your vehicle.to ensure that all four shocks are equal in length, providing optimal performance.

Includes:

Black Anodized Aluminum Shock Assembly Tool for 1/18th 1RC Racing Shocks
1mm Drill Bit for drilling vent holes in the shock caps.
Flat Head Screwdriver for installing shock shaft into the shock end.

1RC8822 – Pit Tray, Gray

Stay organized while working on your 1RC Racing Cars with the 1RC Racing Pit Tray. Made from molded rubber, this tray features 14 designated areas for holding your hardware and tools, keeping everything conveniently in one place. It’s an essential accessory for any pit setup!