fbpx
Wednesday, February 8, 2023

News

Losi 8IGHT Gas Buggy RTR with AVC

Losi - 8IGHT Gas Buggy RTR with AVC_3 copy

The Losi 8IGHT 4WD gas (NOT NITRO) buggy utilizes a Dynamite .31 gas engine, so you can experience all the 8IGHT has to offer now with unprecedented convenience. This version of the 8IGHT buggy comes with the same ROAR National …

Read More »

Troy Lee Designs TEN-SCTE RTR with AVC from Losi

Losi - Troy Lee Designs TEN-SCTE RTR with AVC_1 copy

For this edition of the TEN-SCTE, Horizon Hobby partnered with Troy Lee Designs to create a trim scheme that pays homage to the world of short course racing. The result is an exclusive design that sets it apart from nearly …

Read More »

Serpent SRX-4, 4wd Buggy – Get yours in March!

SRX-4 copy

It was no big secret that Serpent was developing a competition minded 1:10 4wd off road buggy, it was just a matter of time when we would get pictures of it.  Well, former World Champion and Serpent designet Billy Easton …

Read More »

AKA Multi-Tip Tire Punch

AKA - Multi-Tip Tire Punch copy

The AKA Multi-Tip Tire Punch features 6 laser etched, forged steel tips from 2mm – 4.5mm for punching vent holes in tires from 1:10 all the way to 1:5 scale. The steel handle construction can take quite a bit of abuse in …

Read More »

AKA 2 In 1 Handheld Wheel Balancer

AKA - 2 in 1 handheld wheel balancer copy

The 2 in 1 handheld wheel balancer has been engineered to balance most 12mm hex and 17mm hex wheels, including 1:10 buggy, short course, 1:8 buggy and truggy (not compatible with stadium truck). The lightweight design fits in any toolbox without taking …

Read More »

Option and Replacement Parts For The HPI Q32

HPI Racing - Option and Replacement Parts For The Q32_2 copy

The Q32 has been a smash hit for HPI and as such they have released a few replacement and option parts.  There is a USB charger so you can now power up the Q32 from any USB port.  There is …

Read More »

Boom Racing’s Beadlock Wheels Unleashed at AsiaTees

Boom Racing's Beadlock Wheels Unleashed copy

These High Mass Beadlock wheels by Boom Racing are sweet! Featuring the Vaterra Twin Hammers as their model car in the video below, they’ve showcased all of the Boom Racing High Mass Aluminum Beadlock Wheels equipped onto the car! With 1.9 and 2.2 variants, …

Read More »

Pro-Line Racing PRO-2 SC, PRO-2 SC Buggy and Slash 2WD Aluminum Front Sway Bar

Pro-Line Racing - PRO-2 SC, PRO-2 SC Buggy and Slash 2WD Aluminum Front Sway Bar_2 copy

This sway bar changes the handling of the PRO-2 and similar vehicles allowing you to push the truck harder than ever before while reducing traction rolling significantly. The Blue Anodized Aluminum sway bar makes the front end of your truck …

Read More »

Pro-Line Pre-Cut Clear Phantom Body for the TLR 22-4

Pro-Line Racing - Pre-Cut Clear Phantom Body for the TLR 22-4 copy

This is a Pre-Cut Phantom Clear Body for 22-4. The Phantom originated from the mind of Lee Martin and features a cab forward look and sweeping body lines that flow back to a single point. The optional center fin adds additional high speed …

Read More »

Reedy’s 6500mAh 65C 14.8V Competition LiPo Battery

Reedy - 6500mAh 65C 14.8V Competition LiPo Battery

Reedy’s 6500mAh 65C 14.8V LiPo battery pack is competition-tested and developed by their racing team.  It features high capacity for maximum duration on large 1:8 tracks, with a 65C rating for maximum power output.  Designed specifically for competition 1:8 electric …

Read More »

Ready for Action – The TLR 22T 2.0 Stadium Truck Kit

TLR - 22T 2.0 Stadium Truck Kit

With updates that include advanced suspension geometry adapted from the 22 2.0 buggy, a new bell-crank steering system, Gen II shocks with X-ring seals and a thoroughly refined ball differential with tungsten carbide diff balls, the 22T 2.0 is ready …

Read More »

Outerwears Zenoah Flywheel Cover

Zenoah Flywheel Cover

Based on customer feedback and their commitment to provide the best protection from dirt, debris, mud, and water, Outerwears now offers the 20-2915 Zenoah Flywheel Cover in a wide variety of colors. With the success of the flywheel cover for …

Read More »

SWorkz Concept S104 EVO 1:10 Buggy

SWorkz - Concept S104 EVO_1 copy

The revised S104 has new parts similar to that of the SWorkz FCSS and EVO 2 system. It is equipped with brand new shocks and has revised suspension geometry. The center diff is standard but can also be easily fitted …

Read More »

Tamiya Nissan Skyline GT-R R33 – TT-02D

Tamiya - Nissan Skyline GT-R R33 - TT-02D copy

The TT-02 chassis is Tamiya’s standard entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. This version includes the iconic R33, fourth generation Nissan Skyline GT-R body which sit atop the TT02D chassis. …

Read More »

Reedy SC800-BL Sensorless Brushless RTR ESC

Reedy - SC800-BL Sensorless Brushless RTR ESC copy

Reedy’s all-new SC800-BL Brushless ESC is splash-proof and features a compact footprint that allows for easy installation in most 1:10 vehicles. It is the perfect replacement for your 1:10 RTR ESC thanks to its ease of setup and no-nonsense forward/brake/reverse …

Read More »