fbpx
Tuesday, January 31, 2023

News

Factory Team T-Handle Ratchet Driver

Team Associated - Factory Team T-Handle Ratchet Driver copy

The Factory Team T-Handle Ratchet Driver makes installation and removal of screws and bolts easier than ever with its comfortable handle, long reach, and ratchet action.  Insert your 1/4″ hex head or screwdriver bit (available separately) into the tip, adjust the switch …

Read More »

New Lineup of High End LiPo Batteries from TrakPower

TrakPower has 16 new high End LiPo batteries that are sure to impress. Available in 1S 3.7V, 2S 7.4V and 4S 14.8V with discharge rates ranging between 50C and 100C

TrakPower has 16 new high End LiPo batteries that are sure to impress.  Available in 1S 3.7V, 2S 7.4V and 4S 14.8V with discharge rates ranging between 50C and 100C.   Some of these new packs are hard wired with a …

Read More »

Tamiya Volkswagen Amarok (CC-01 Chassis)

Tamiya - Volkswagen Amarok (CC-01 Chassis) copy

Built on the popular and well proven CC-01 chassis, the Volkswagen Amarok, is a popular midsize pick-up with stylish lines. The chassis features front and rear gear differential with the rear lockable, perfect for off-road fun. Click here for more …

Read More »

4wd Fun With The DB01RR From Tamiya

Tamiya - DB01RR copy

This limited edition version of the DB01 comes loaded with top end hop-ups to make it a mean racing machine. The chassis lower deck is compatible with square-shaped batteries, and the kit includes big bore aeration shocks for high-level off …

Read More »

The Losi LST XXL 2 Electric Monster Truck

Sitting on a 2.5mm aluminum chassis the LST XXL2 packs ferocious features into a sturdy 1/8-scale chassis. It comes with a waterproof 6S compatible Dynamite ESC, 2200Kv motor and a SpektrumDX2E radio system with AVC technology so you can harness …

Read More »

Tekno RC EB48.3 1/8 Electric Off Road Buggy

Tekno RC - EB4822

Always improving, the people over at Tekno RC have just announced that the EB48.3 1/8 electric buggy is ready for release.  Featuring a number of improvements like revised suspension geometry with new suspension arms, new shock towers, longer shocks with …

Read More »

Castle Creations Mamba Monster X

Castle Creations Mamba Monster X Brushless ESC

Castle Creations introduces the Mamba Monster X, the next gen 1/8 brushless ESC modeled after the Monster 2. This new ESC can handle more power, has a on-the-go programmable feature and can run either sensor or sensorless brushless motors. Castle …

Read More »

JConcepts Scorpios All-Terrain 2.2″ Racing Tires

JConcepts Scorpios All-Terrain 2.2in Racing Tires

Rock racing requires a tire that not only works well on pavement, but also dirt and, of course, rocks. JConcepts has you covered with the release of the Scorpios, a 2.2″ tire that will perform miracles on any vehicle using …

Read More »

JConcepts Vengeance 2.2″ Wheels for Axial’s Yeti

JConcepts Vengeance 2.2″ Wheels for Axial's Yeti

JConcepts has introduced the Vengeance, a stylish set of 2.2″ wheels for the Axial Yeti. Rolling in as a 1-piece unit, this wheel comes with different adapters to adjust the front or rear offset. It also comes with a pair …

Read More »

Exotek Alloy Bulkhead Set for HPI’s Sprint 2

Exotek Alloy Bulkhead Set for HPI's Sprint 2

Exotek has released a pair of machined aluminum bulkheads for the HPI Sprint 2. These bulkheads add strength to the Sprint 2, especially when running the Flux system at full power. They have been machined to reduce weight as well …

Read More »

Pro Boat Impulse 31” Deep-V V3 Brushless RTR Boat

Impulse 31_1 copy

The Impulse 31 dishes out speeds in excess of 50 mph thanks to a water cooled 1750Kv 4-pole brushless motor and Dynamite 120A water cooled esc that are 6S LiPo capable. It features fiberglass hull, anodized off-set rudder adjustable with …

Read More »

Hobby Pro Distribution steps back for PR Racing America

In a short period of time Hobby Pro Distribution has done a great job importing, promoting and supporting all the hot vehicles from the people over at PR Racing.  Due to this HUGE success there are BIG changes on shaping …

Read More »

ARC R10 Floating Steer System

Hobby Authority Distribution - ARC R10 Floating Steer System copy

The Floating Steer System can upgrade all R10 2013 – 2015 kits.   It will increase flexibility in front end and provide more mid corner turn. It also allows you to remove the front drive belt without taking the steering system …

Read More »

Team STRC CNC machined aluminum Axial Yeti option parts in blue anodize

Blue Yeti-small copy

The popular line of Axial Yeti option parts are now available in brilliant blue anodized to match the paint scheme of the Yeti RTR body.  This first wave of option parts release takes care of the Yeti front shock tower, …

Read More »

Pro-Line Suppressor X1 (Firm) Off-Road 1/8 Buggy Tires

Pro-Line - Suppressor X1 (Firm) Off-Road 1-8 Buggy Tires copy

The Suppressor was designed specifically for medium packed to loose outdoor tracks. It features a smooth transition from the sidewall to the tread to prevent catching the sharp edges in the track, which can cause violent roll overs and lost time. …

Read More »