Saturday, June 15, 2024


Tamiya Hornet – Black Metallic

Tamiya - Hornet – Black Metallic copy

Thirty years after its initial release the Hornet is back, and with a Black Metallic look. It has all the vintage features like a solid rear axle with oil-filled shocks, independent swing axle front suspension with friction shocks, sealed gearbox and …

Read More »

Tamiya Toyota Mountain Rider 4×4

Tamiya - Toyota Mountain Rider 4x4 copy

This is a special re-release of the popular Mountaineer. The revamped 4×4 chassis is the same as the 2012 re-release of the Toyota Bruiser and features a realistic three-speed transmission and a solid axle leaf spring suspension. The original layout …

Read More »

Tamiya Lowride Pumpkin – M06

Tamiya - Lowride Pumpkin – M06 copy

The always-popular Midnight Pumpkin gets a reboot, so to speak, with this Lowride Pumpkin. It has the same classis look and now sits on the popular M06 chassis. A cool front bumper/push bar will help keep the body well-protected should …

Read More »

Tamiya TB-04 Eneos Sustina

Tamiya - TB-04 Eneos Sustina copy

The ENEOS SUSTINA, a Japanese Super GT Series entry, is based on the Lexus coupe released in 2014. The body sits on an efficient TB-04 chassis and uses a shaft driven drivetrain with sealed gear differentials. The double-wishbone suspension system …

Read More »

Tamiya F1 TRF101W Chassis

Tamiya - TRF101W Chassis copy

The TRF101W features redesigned carbon fiber upper and lower arms to improve durability and enhance performance. The chassis is now 2.5mm thick to provide greater flexibility and increase traction on low-grip surfaces. Battery posts have been moved forward, transferring pitch loads …

Read More »

Serpent Spyder SRX-2 RM Short Course Truck

Serpent - Spyder SRX-2 Short Course Truck_1 copy

The Spyder SRX2 RM Short Course Truck features a composite chassis and shock towers, durable large front and rear bumper, a ball-differential, slipper clutch, extra-long suspension arms, big-bore 12mm hard-coated shocks, SC body with flares, SC wheels, spring steel metal …

Read More »

Duratrax Li-24 2S-4S Balancing Charger with Traxxas Plug

Duratrax - Li-24 2S-4S Balancing Charger with Traxxas Plug copy

This compact, well-priced charger from Duratrax can balance charge 2S – 4S LiPo and LiFe packs with a Traxxas connector.  It has a 3A maximum charging rate, utilizes LEDs to indicate individual cell charging and has gold-plated connectors.   Drive on …

Read More »

HPI HB TCXX Touring Car Upgrade Pack

HPI - HB TCXX Upgrade Pack_1 copy

Bring your TCXX up to speed with this upgrade pack from HPI. It features rebuildable DCJ V2 driveshafts, a one-piece servo mount, a V2 motor mount that moved the motor closer to the center line of the car, shorter length …

Read More »

MIP Spline CVD Center Drive Kit for the Axial SCX10 with 12.3” Wheelbase

MIP - Spline CVD Center Drive Kit for the Axial SCX10 with 12.3” Wheelbase

MIP’s SCX10 axles now incorporate a pin set screw for attachment as opposed to dual set screws. Along with that improvement, they have also changed the drive hubs so that there is no longer any interference when it comes to …

Read More »

RPM Nerf Bars for the Traxxas Rally, LCG Slash 2wd & LCG Slash 4×4

RPM - Nerf Bars for the Traxxas Rally, LCG Slash 2wd & LCG Slash 4x4_2 copy

The RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes the rigidity while absorbing additional impact energy.  They are available in RPM blue and black. …

Read More »

Axial SCX10 Jeep Wrangler G6 Falken Edition

Axial - SCX10 Jeep Wrangler G6 Falken Edition copy

The Jeep Wrangler G6 Falken Edition bears the special edition livery that echoes Falken’s established legacy. The SCX10 features a Poison Spyder Rock Brawler front bumper, a dovetail universal bolt-in cage, and a roof mounted light bar. With Falken Wildpeak …

Read More »

RB6 Rear Mid Motor Aluminum Bulkhead from RDRP

Revolution Design Racing Products - RB6 Rear Bulkhead MM Aluminium_1 copy

The rear aluminum bulkhead for mid motor converted vehicles is machined from high quality 7075-T6 aluminum and is laser-etched.  This makes for a solid base for the upper camber link mounts but also the wing mounts. It is designed to …

Read More »

ST Racing Concepts Option Parts For The Team Associated B5 and B5M

STC91534 copy

STRC has a host of goodies ready for release for the B5 and B5M.  There are carbon fiber battery straps, machined aluminum front hinge pin braces in blue, gun metal and silver and a 25 degree front bulkhead also available …

Read More »

Schelle Racing Releases Ball Bearing Steering for Kyosho RB6, RT6, SC6

Schelle Racing Releases Ball Bearing Steering for Kyosho RB6, RT6, SC6

Schelle Racing has released an updated steering rack for Kyosho RB6/RT6/SC6 owners. This zero-slop setup features an aluminum rack with Ackermann adjustments as well as a wide steering pivot option. It rides on a set of quality bearings (instead of …

Read More »

Get Control with the Spektrum DX4C DSMR Radio

Spektrum - DX4C_1 copy

The DX4C offers a 20-model memory and the signal security of DSMR control. The software includes programming for AVC (Active Vehicle Control) receivers for fun and control. Thanks to its SD card slot, you will always be able to upload …

Read More »