fbpx
Saturday, April 13, 2024
rally

News

Reedy LiPo 5300mAh 70C 7.4V Shorty Battery

Team Associated - Reedy LiPo 5300mAh 70C 7.4V Shorty Battery

Reedy LiPo 5300mAh 70C 7.4V Shorty Shorty batteries have become the standard in 1:10 offroad buggies thanks to their light weight and tuning versatility. Reedy’s 5300mAh 70C Shorty LiPo Battery offers extended run times and maximum power output in this …

Read More »

Yeti SCORE Trophy Truck 4WD Kit from Axial

http://www.axialracing.com/products/ax90068

Now in kit form, the Yeti™ SCORE® Trophy Truck® is a purposely engineered desert truck with a solid rear axle and independent front suspension. Make no bones about it, this is not a short course truck nor is it designed …

Read More »

Udder Butter Waterproof Grease from CowRC

CowRc - Udder Butter Waterproof Grease copy

Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, shock linkages, swing arm pivots, transmission, axles, differentials and more! Enhanced mechanical stability and special anti-wear additives protect and lubricate. Mineral oil based …

Read More »

LRP 2500mAh VTEC LiPo Receiver Pack

LRP - 2500mAh VTEC LiPo Receiver Pack copy

The LiPo receiver batteries feature highest power and an unbelievable performance. With their standard dimensions, the VTEC LiPo RX-Packs are suitable for all R/C models available on the market. Features 2/3A Straight and Hump types with robust cell guard Ready-to-use …

Read More »

LRP 2900mAh Shorty LCG 110C/55C LiPo Battery

LRP - 2900mAh Shorty LCG 110C-55C LiPo Battery copy

LRP sets technological trends with innovative development work in the area of high-end batteries. RC racers can take profit from brand new and upgraded lines now. The Low Center of Gravity – LCG – line packs are lower compared to …

Read More »

SWORKz S12-1R 2wd Off Road Buggy

SWORKz - S12-1R 2wd Off Road Buggy_3 copy

The S12-1R chassis platform is designed for racing. It features a mid position gear box with a lower position spur gear system. The motor position is 65mm away from the mid-front gear box (S12-1M) improving the overall grip when racing …

Read More »

HobbyWing XeRun XR10 Pro ESC

HobbyWing - XeRun XR10 Pro _1 copy

The latest offering from HobbyWing, the XR10 Pro is ideal for 1/10 applications boasts a 160A continuous and 1200A burst in current capabilities.  It is available in black, red and orange, can be used with 2S and 3S LiPo battery …

Read More »

2.2 BFGoodrich Baja T/A KR2 Tires – R35 Compound from Axial

Axial Racing - 2.2 BFGoodrich Baja T-A KR2 Tires - R35 Compound

In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this …

Read More »

Serpent Cobra SRX8 1/8 Nitro Buggy

Serpent - Cobra SRX8 1-8 Nitro Buggy_2 copy

The Cobra SRX8 from Serpent was designed in part by Billy Easton and is a completely new platform.   Some features include gear-diffs with larger cases to allow for more oil inside, and have a built in pressure compensating system, spring …

Read More »

Machined Diff Gears for the X-Maxx by Traxxas

Traxxas - Machined Diff Gears for the X-Maxx copy

New machined, spiral cut gears are now available to give your X-Maxx a virtually bullet-proof drivetrain that can handle the most extreme punishment.  Available in sets for the front or rear, it is a direct replacement for the stock components. …

Read More »

Subaru Impreza – TT-02 Monte-Carlo ’99 from Tamiya

Tamiya - Subaru Impreza - TT-02 Monte-Carlo '99 copy

The TT-02 chassis line-up is Tamiya’s entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit …

Read More »

Plasma Edge II – TT-02B from Tamiya

Tamiya - Plasma Edge II - TT-02B copy

This updated version of the classic Plasma Edge buggy features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA …

Read More »

Mercedes-Benz G 320 Cabrio – MF-01X from Tamiya

Tamiya - Mercedes-Benz G 320 Cabrio - MF-01X copy

The Mercedes Benz G320 Cabrio was a G Class series vehicle that was sold between 1997 and 2001. While many G Series cars were produced, this version featured a soft convertible top and was based on a short wheelbase version …

Read More »

Mercedes-Benz Unimog – CC01 425 from Tamiya

Tamiya - Mercedes-Benz Unimog - CC01 Unimog 425 copy

This is a factory painted and ready-to-run R/C model of the Mercedes-Benz Unimog 425. The super detailed polycarbonate body is mated to the fun to drive and easy to maintain CC-01 chassis. It features 2WD with front double-wishbone, rear 4-link …

Read More »

Kyosho RZ6 Shaft Drive Conversion Kit

Kyosho - RZ6 Shaft Drive Conversion Kit_1 copy

For the ultimate in performance on high traction surfaces like AstroTurf Kyosho has this cool conversion that uses components similar to a 4wd buggy on the rear and a standard RB6 front end.  The kit comes with a new chassis, …

Read More »