The foam strips add tune-ability as you can use them with Red EVO inserts, or omit them and use a standard Red insert. Application of the conversion kit is simple on any 1/10-scale 2WD/4WD front or rear wheel. Each kit comes …
Read More »
The Build – Part 7 In this step we attach the tire/wheels to the car as well as the body mounts. We also top the LM-1 off with one of the most amazing bodies I’ve ever seen. Thanks to Brad …
Read More »
The Build – Part 10 In Part 10 we finish up our Losi 22SCT build; the body, the wheels and the tires. Four quick steps…let’s get to it! Build Notes: You’ll be using CA glue to bond the tires to …
Read More »
When you’ve finished the oatmeal in the pantry, you’ll have a convenient canister to store tires and wheels in. The canister also makes a quick and easy car stand. You can get creative and paint it, or cover it with …
Read More »
To avoid having to remove your dish wheels to adjust your suspensions pivot balls, drill a 5mm hole through the wheel. Align it with the pivot ball and now you can reach through with a hex driver while leaving the …
Read More »
When you clean your tires, avoid letting water get into your wheels and the foam inserts, or it may throw off the wheel’s balance and possibly damage the insert. Stick tape over the vent hole in the wheel before you …
Read More »
Doug likes the look of a narrow monster truck tire but the tires he had on hand were wide. Using a cutoff wheel chucked into his drill press he was able to cut the outer bead off and glue the …
Read More »
