The Traxxas Unlimited Desert Racer is a scale work of art with performance to match. However, RPM customers have reported the stock trailing arms are a weak link. If you’re tired of bending and breaking stock trailing arms, RPM has the answer! RPM Trailing Arms are some of the toughest, lightest and most innovative trailing arms available.
What makes RPM versions so tough? They started by increasing the wall thicknesses by roughly 40% in the damage-prone areas around the shocks. They then added more material around the pivot balls by roughly 12%, using up all of the available room at the axle mount. RPM also squared off the bottoms of the Trailing Arms, giving room to add on unique Trailing Arm Skid Plates (sold separately).
RPM Trailing Arm Skid Plates protect the Trailing Arms from skid and impact damage and are extremely easy to install, remove and replace. Two screws are all that’s needed and to maximize the effectiveness, each Skid Plate is reversible! If one end is taking the brunt of the punishment, simply flip it around for double the life expectancy.
Each Trailing Arm Skid Plate is over 3/16” (5mm) thick with three skid ribs built in for smooth and easy transitions over tall obstacles. Adding RPM Trailing Arm Skid Plates to a set of RPM Trailing Arms will provide some of the best and toughest protection your ride deserves.
RPM Trailing Arms and Trailing Arm Skid Plates are manufactured in the USA and are molded from RPM’s engineering grade nylons, factory backed with a limited lifetime breakage warranty. Bolt on a set today and never worry about fragile trailing arms again!
Trailing Arms for the Traxxas Unlimited Desert Racer- 81282
Trailing Arm Skid Plates for the RPM #81282 Trailing Arms- 81362
Tech Notes: RPM Trailing Arms for the Traxxas Unlimited Desert Racer replace stock Traxxas #8544 and are sold in pairs. RPM Trailing Arm Skid Plates are sold in pairs and only work with RPM #81282 Trailing Arms.
For More Information, Visit RPM: HERE