This chassis conversion kit for the 22-4 allows users to run a standard shorty style 2S LiPo battery pack without needing to modify the chassis or side rails. The chassis comes with all components to make the conversion as easy …
Read More »
The TLR OGIO Pit Bag features large openings, reinforced materials, telescoping pull handle, heavy duty oversized wheels with extra clearance, several multi-use LID compartments for apparel and smaller gear and much more. TLR OGIO Backpack has a padded interior laptop …
Read More »
The 4mm thick chassis on the 8IGHT-T E 3.0 Electric Truggy Kit is milled and balanced for electric power and has multiple ESC and battery mounting locations for weight tuning. Long-bore 16mm shocks, tapered springs are standard features as are …
Read More »
It was probably less than a minute after the 8IGHT 3.0 Nitro Buggy was released that electric power junkies were wondering if and when an E-3.0 would hit the shelves. Some wondered if it would be a conversion again or would Team Losi Racing go the route of their popular and newly-released TEN SCTE 2.0 with an all-electric specific kit. TLR is apparently done with conversions because the 8IGHT-E 3.0 is here and it’s all electric and ready for all the racing you can throw at it.
Read More »
MIP’s Puck Drive system for the 22 SCT 2.0 is an aluminum based drivetrain system which includes aluminum diff outdrives, aluminum C-CVD bones, and replaceable plastic orange wear Pucks that take the place of inferior steel pins. This combination greatly …
Read More »
The all-in-one rebuild kit for TLR 22 Series MIP Differential comes with all necessary components to completely freshen up your diff without having to source several different part numbers at a higher cost. Includes MIP Confetti Sticker (2), MIP Modified …
Read More »
This set includes 2.2mm, 2.3mm, 2.4mm and 2.5mm thick front sway bars and 2.3mm and 2.4mm thick rear sway bars. Front Sway bars provide less off-power steering and more on-power steering while rear sway bars provide more responsiveness and an …
Read More »
Last week we tore into two major gasoline engine powered vehicle releases from Losi, the 8IGHT-T RTR 1/8 4WD Gas Truggy with AVC and the 5IVE MINI WRC. Now we have the Losi 8IGHT RTR Gas Buggy and we’ve unboxed …
Read More »
If you demand all the attention when out having fun driving with your RC friends, then this is probably the next machine to make its way into your RC stable. The Losi 5IVE MINI WRC has landed, well, was heaved …
Read More »
Proline has released a pre-cut version of their Phantom body for the TLR 22-4. It features a cab-forward design, is low and sleek and offers and optional center fin that adds high-speed stability. Also includes Proline’s pre-cut Trifecta buggy wing. …
Read More »
This is a Pre-Cut Phantom Clear Body for 22-4. The Phantom originated from the mind of Lee Martin and features a cab forward look and sweeping body lines that flow back to a single point. The optional center fin adds additional high speed …
Read More »
With updates that include advanced suspension geometry adapted from the 22 2.0 buggy, a new bell-crank steering system, Gen II shocks with X-ring seals and a thoroughly refined ball differential with tungsten carbide diff balls, the 22T 2.0 is ready …
Read More »
Never be without the right sized hardware for your TLR 22 series vehicle. This hardware box includes at least 1 each of every screw used on the 22, 22 2.0, 22T, 22SCT, 22SCT 2.0 and 22-4 with multiples of popular …
Read More »
Add weight where you need it and durability with the aluminum camber plate and aluminum and brass camber plate towers from TLR. The two towers allow for an easy way to tune with weight by adding 15g of weight when …
Read More »
These new blocks reduce the total amount of toe-in and offer a lower roll center. To balance between the forward drive given by more toe, and the added steering of less toe the 2.0 degree block is idea for higher …
Read More »
