Sweet new release announced…here is the Tamiya TA08 Pro competition touring car. It is a further hopped-up chassis in the ever evolving TA series of Tamiya’s touring cars. This 2 belt-driven 4WD chassis features a Stepped V design and plenty of high-performance parts that ensure this is a seriously quick chassis that you will love to drive.
VIDEO
Tamiya TA08 Pro chassis kit (#58693)
KEY FEATURES
This is a 1/10 scale RC touring car chassis kit.
Features Stepped-V shaped chassis which balances weight and rigidity.
The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution.
Positioning spur gear in front of motor produces stable drivability.
A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers.
Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively.
Comes with Super Short Big Bore size shock dampers.
Universal shafts and full bearings give efficient drive.
Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions.
Angled battery and R/C equipment mean higher center of gravity and compact, lightweight chassis with optimal pitching and roll flex.
Stepped-V chassis molded in carbon fiber-reinforced resin facilitates rigidity even without an upper deck. The front end of the rear suspension shafts are mounted directly onto the chassis.
Angled battery and R/C equipment give optimum weight distribution, and a compact, grippy chassis, even on low-grip surfaces.
Slim chassis reduces surface contact and urethane bumpers with holes allow air to escape for the stability.
With spur gear ahead of motor, the chassis gives a stable drive, and belts are closer in length to facilitate minimal drive loss.
Ball connected A-★Hanging suspension mounts firm up the rear for more grip and stability, and facilitate toe control* for smooth cornering. *As the suspension compresses though corners, toe-in range changes and provides a traction boost.arms are identical front and rear, and produce more potential tire load, for good grip even on slipperier surfaces.
Hanging suspension mounts firm up the rear for more grip and stability, and facilitate toe control* for smooth cornering. *As the suspension compresses though corners, toe-in range changes and provides a traction boost.
The chassis is equipped with a compact cable case to keep cables securely and safely out of the way.