Based off of the successful Natrix 748 Nitro Touring car, the Natrix 748-e (electric) 1/10 200mm Touring Car has been optimized to run on either 2S or 3S LiPo battery packs with appropriate speed controls.  It features a 2-belt drivetrain, …

The LRP iX8 Version 2 features a new hardware and is already equipped with the latest v2.6 team firmware as standard.  It generates significantly less heat and its performance in racing conditions is extremely consistent.  Aggressive Initial Drive settings and …

Check out what the people over at Pro-Line are cooling up!  Prime 2.8″ Tires are set to be released later this month.  They will be available in the M2 compound, Pre-Mounted with Closed Cell Foam.  Primes will be offered mounted to …

The brushless RC10B4.2 is now available with a 3300mAh Reedy Wolfpack battery and 423-S 35W Compact Balance Charger.  Delivered in one of two hot paint schemes, this release includes a water-resistant brushless esc and 3300kV motor, sealed receiver box, and blue anodized V2 …

3Racing’s Sakura D4 AWD and RWD are the hottest drift cars being talked about right now, so you know what comes next. It’s pre-order time! Our friends over at AsiaTees let us know that If you’re ready to pre-order this …

RPM has been molding parts for a long time, mostly in black, green, white and blue. They recently polled their Facebook followers, asking them what other color they would like to see the parts in. In an overwhelmingly large response, …

The GT-300W 1/12 scale pan car is the newest edition to the Team Saxo vehicle lineup. This onroader features a carbon fiber chassis, blue aluminum arm mounts, center shock mount and steering as well as a blue aluminum rear pod. …

AVID RC has released this 2mm, aluminum chassis for the Team Associated TC6.2. Features include a 7075-T6 aluminum chassis with weight-saving cutouts, milled battery tape slots and tape tunnel on the underneath of the chassis as well as a narrower …

These front and rear shock towers for the SCT410.3 and EB48SL are 6mm lower than the original SCT410 towers and should only be used with TKR5515 and TKR5516 suspension arms.  They are made from 5mm thick carbon fiber with the …

The unique handle design of the 17mm Wheel Wrench and Shock Cap Tool is comfortable in the hand and provides much more leverage versus traditional designs. This is accomplished by a longer handle that has ergonomic chamfering throughout to deliver the …

Brakes are one of the more difficult areas of tuning inthe world of RC. There are multiple factors that come into play. The motor, gearing, traction and vehicle’s suspension all affect the weight transfer. It goes on and on. One thing we have instant control over is the brake settings of our ESC and transmitter. This month’s tech topic is going to take a little closer look at the brake side of our tuning.

When RC Driver Editor-in-chief Greg Vogel headed out to the parking lot for the first time with his Tamiya MAN TGX 26.540 6×4 XLX, we grabbed some video of the drive. Tamiya’s tractor trailer series is a fun modeling experience …

Tuning Haus has released this cool set of billet aluminum setup wheels designed to work with any vehicle that utilizes a 4mm threaded axle. A rubber o-ring surrounds the wheel to keep from marring your setup surface, and a nice …

Adjust the rebound and compression separately similar to the way you would a real vehicle with MIP Bypass1 Team Tuned Kit for the T5M and SC5M. The all new piston features a new design that provides much more initial pack …

Our friends over at rcMart have a cool video of the hotly anticipated 3Racing Sakura D4 RWD and AWD.  From the looks of things these new vehicles are going to be great so be sure to get on the waiting list …