Believe it or not, after each video in this series is created, we set the project aside to take care of other builds and content happening at the RC Driver workshop. There are a lot of moving parts to what we do. But! The Project Maxx has circled back around and we’re continuing with building up this killer RC monster truck. In this video, we are swapping out the stock telescoping driveshafts of the standard width Steel CV Driveshafts. With this swap, you will also need new wheel hexes and nuts. Finishing off the video is a quick swap of the spur gear from the stock composite to the steel gear option. This project is coming along great, make sure you don’t miss a single episode!
Part Number: 89076-4
Visit Traxxas: https://traxxas.com/
Steel CV Driveshafts (8950X)- https://traxxas.com/products/parts/8950
Steel Spur Gear (6448R)- https://traxxas.com/products/parts/6448R
17mm Wheel Hex Hubs / Blue (8654)- https://traxxas.com/products/parts/8654
17mm Wheel Nuts / Blue (7758)- https://traxxas.com/products/parts/7758
Pit Mat (3426)- https://traxxas.com/products/parts/3426
Metric Tool Set (8710)- https://traxxas.com/products/parts/8710
Project Series Playlist: https://www.youtube.com/playlist?list=PLTLKQ_RQ1IfAHdCklocPysWf_9iZLXZy3
Don’t Miss A Thing! Follow Us:
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!