The upgrade aftermarket parts designers at RPM have been hard at work and this time gave their focus to the awesome Traxxas X-Maxx. Just released are these RPM oversized front axle carriers purpose made just for the massive X-Maxx 4×4 monster truck.
The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm. The oversized bearings that RPM use are gigantic, measuring 20x32x7mm. That’s 5mm larger on the diameter and 3mm on the width. The difference equates to a dynamic load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
If you’ve ever blown a stock inner bearing or broken a stock front axle carrier, you need to check these out. RPM Oversized Front Axle Carriers are molded in black and backed by RPM’s limited lifetime breakage warranty. You can’t go wrong with RPM parts on your X-Maxx.
Tech Notes: RPM Oversized Front Axle Carriers replace stock Traxxas #7737. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (#5106 or #5106A) and are not included in this kit.
For more information, visit: RPM
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!